Are there studs behind a fireplace?


Most homes are built with 16” on-center studs, which means there should be a stud every 16”. Keep this in mind if you have trouble finding studs above a fireplace. Don’t worry if you only find one stud when trying to mount a large TV or other heavy object.

Click to see full answer

Just so, how do you find studs behind a brick fireplace?

Re: How To Locate Studs Behind A Brick Wall Use a very strong magnet or a metal detector to find the metal ties that secure the brick to the drywall. Chip out the mortar to visually verify that the stud is back there and then measure off your 16’s in either direction.

Secondly, should I mount TV above fireplace? It’s not advisable to mount a TV above a fireplace because excess heat and electronics don’t mix. The area above the fireplace is often warmer than other wall surfaces in your home. Consider this: A gas fireplace can generate 20,000 to 35,000 British thermal units (BTUs) of heat per hour.

Then, how far apart are wall studs above fireplace?


Does heat from fireplace damage TV?

The short answer is – yes. However, to ensure your television isn’t damaged from the heat, care must be taken to ensure heat generated by the fireplace is redirected away from television. Fireplaces and televisions complement each other beautifully, providing entertainment, ambiance and warmth.

Can I drill into my chimney?

Typically, you drill into a masonry chimney when using expanding wall anchors to attach decorative wrought-iron accessories or address numbers. Decorative accessories and address numbers have predrilled holes for fasteners.

Can you mount a TV without studs?

Use a toggle: If there simply aren’t any studs where you want to mount the TV, then you need to use some sort of hollow wall anchor. Mounting a TV on drywall or plaster without attaching to a stud can be a very safe and reliable solution IF you know the limits of the wall and the toggles.

What do you hang over a fireplace?

15 Mantel Decor Ideas for Above Your Fireplace
  1. Mirror. Image Provided by: New Darlings.
  2. Art. You don’t have to be a fine art connoisseur to feature art you love in your home, and above your mantel is the perfect place to show off your artistic taste.
  3. Family Photos. Image Provided by: Pursuit of Handyness.
  4. Television.
  5. Clock.
  6. Wreath.
  7. Chalkboard.
  8. Window Pane.

Can you mount a TV above a brick fireplace?

But TV mounting on a brick fireplace isn’t simple. If you‘re dead-set on mounting a TV on a brick fireplace, it’s a good idea to call an expert. You‘re going to need more than your basic masonry bits, which will dull quickly, and the consensus is that a hammer drill is best for the job.

Why can’t I find studs in my wall?

If the you hear a higher pitch sound above the nails then you’ve likely found a stud. Just be careful if there are pipes in that same wall. Move left to right tapping on the wall and when you hear a different pitch that’s likely the stud. Once you find one location you can measure over 16 inches to find the next stud.

How do I know where the studs are in my wall?

A good starting place is 16 inches from a corner. For better precision, use a tape measure and mark 12 inches, 16 inches, and 24 inches from the corner. Tap the wall at each distance. You’ll hear a solid sound when you tap the part of the wall that is supported by a stud.

What is the best stud finder?

So here is my list of The 10 Best Stud Finders.
  • Black & Decker BDL190S BullsEye Stud Finder.
  • Zircon MultiScanner i520 Stud Finder.
  • VIVREAL 4 in 1 Stud Finder.
  • CH Hanson 03040 Magnetic Stud Finder.
  • Classware Stud Finder.
  • TACKLIFE 4 in 1 Stud Finder.
  • Precision Sensors ProFinder Stud Finder.
  • Zircon StudSensor e50 Stud Finder.

What is deep scan on stud finder?

The StudSensor HD55 deepscanning stud finder features an enhanced LCD display, with Target Spotlight, that illuminates on-screen when you’ve found the edge of a stud.

Are there studs in brick walls?

Is It Possible To Find Studs In Brick Walls? The short answer is yes. However, the specific method you use will depend on the age of the house, as well as whether you are dealing with actual brick or brick veneer.

Do stud finders work through brick?

Standard electronic stud finders can easily detect these drywall studs, but a home with a brick facade requires a stud finder with a deep-scanning option; these facades can be up to 1 inch thick. Using a higher-end deep-scanning device will allow you to find studs through the facade with accuracy and speed.

How do you find a stud in a textured ceiling?

How to Use a Stud Finder on a Popcorn Ceiling
  1. Access the ceiling by standing on a ladder.
  2. Press a thin piece of cardboard against the ceiling area where you would like to find the joist.
  3. Press the stud finder onto the left side of the cardboard.
  4. Activate the device’s deep scanning option.

How do you remove brick veneer from a fireplace?

Begin chipping away at the mortar around the brick in one of the top corners of the wall with a hammer and chisel. Remove the mortar around the brick until you can reach the back edge of the veneer. Veneer used in interior work is usually about 1/2-inch thick. Wear safety goggles and gloves when removing the veneer.

Are there studs in concrete walls?

The trick to these is in the word “hollow” … sound echoes in the cavity when you knock on the wall, so a solid concrete wall will sound different than a hollow drywall. In which case it’s most likely a concrete wall, though some types of drywall use metal studs instead of timber framing.

What is the most common stud spacing?

If you don’t have a stud finder, there are several methods that can be effective in finding studs. When a home is framed, the wall studs are usually spaced 16 or 24 inches apart. If you start in a corner and measure out 16 inches and you don’t find a stud, you should find one at 24 inches.

How much weight can a stud hold?

Find a Stud

A nail in just drywall can’t hold more than a few pounds of weight, but a thin nail in a wood stud can typically hold up to 20 pounds and several coarse threaded wood screws in wood studs can typically hold up to 100 pounds or more.

Is there a stud finder app?

Stud Detector is one of the best stud finder app for android users which allows you to easily ind metal framing studs. It is simple, easy to use and free android app which works on basis of magnetic field and compass apps. You can also use it as to know magnetic field from your android smartphone.

Do stud finders work?

I mean do stud finders really work? Yes! Sort of. Most magnet type stud finders don’t work effectively since they are dependent on locating the fasteners (screws) used to secure the drywall and they can be very difficult to locate.