How do I reset my BlueAnt st3?

414
SHARES
2.3k
VIEWS


Pairing Your BlueAnt
  1. Make sure the Supertooth 3 is turned off.
  2. With the Supertooth 3 off, hold down the Multi-Function button for about 6 seconds, until the light on the front of the unit starts flashing red and blue.

Click to see full answer

Regarding this, how do I reset my BlueAnt?

Reset the BlueAnt device. Press and release the “Vol +,” “Vol -” and “Multi-Function” buttons all at the same time. The volume buttons are located on the side of the BlueAnt, while the Multi-Function button is on the front. The BlueAnt resets and clears the existing pairing list.

Also Know, how do I reset supertooth voice? Power Off: Press and hold MFB (1) for 5 seconds until a voice announces, “SUPERTOOTH 3 powering down.” The Bluetooth Indicator (3) will turn a steady red for 4 seconds, the device will then switch off. 0000.” This means the kit is now ready to pair.

Correspondingly, how do I pair my BlueAnt st3?

Press the green button until the LED will blinks red/blue. The SUPERTOOTH 3 will then ask you to pair your phone. On your phone bluetooth menu, search for devices and select BlueAnt ST3 then enter 0000 as pincode.

How do I make BlueAnt Bluetooth discoverable?

Pairing Your BlueAnt

  1. Select Settings.
  2. Select General.
  3. Select Bluetooth.
  4. Wait for your phone to search for devices, then select your BlueAnt device from the list.
  5. If you are prompted for a PIN, enter 0000 (four zeros).
  6. Select Connect.

What is SuperTooth?

The SuperTooth TW1 is a True Wireless headset stereo able to stream music from any Bluetooth A2DP device, including iPhone, iPad – or even iPod Touch. SuperTooth TW1 is equally compatible with all other phones, smartphones including Android, PCs, and MP3 players that support Bluetooth A2DP.

How do I delete a paired device from my JVC car stereo?

You can delete a registered Bluetooth device.
  1. Press the [Ú] button. “BT MODE” appears and enter the Bluetooth mode.
  2. Use the [Control knob] to select “SETTINGS” > “PAIRING” > “DEVICE DELETE”.
  3. Use the [Control knob] to select an Bluetooth device.
  4. Use the [Control knob] to select “YES”.

How do I use BlueAnt s4?

S4 True Handsfree
  1. Use Your Voice to Make and Receive Calls. To activate the S4, all you have to do is say the hands-free trigger phrase “BlueAnt Speak to Me” and the S4 will be ready for your voice commands.
  2. Hear Your Messages on the Go.
  3. A2DP Streaming.
  4. Free Android Application.
  5. The S4 Talks You Through It.

What is a BlueAnt device?

The BlueAnt Android™ applications further enhance the integration between your BlueAnt device and your Android smartphone. Now you can hear your text messages read aloud directly into your headset or speakerphone.

How do I change the language on BlueAnt commute 3?

( Commute 3) From off, press and hold the On / Off button until the Bluetooth indicator turns blinking red/blue. (The Commute3 is now on pairing mode.) Please be patient because the Commute 3 has 12 languages and it will cycle all available language.

How do I pair SuperTooth voice?

The SuperTooth HD must be in pairing mode (the kit must be turned off, long press the On / Off Button (7) until the Bluetooth Indicator (2) blinks red and blue). The kit is in pairing mode now. Now your kit is in pairing mode, the kit says instructions in the language that was previously selected.

How do I connect my SuperTooth buddy to my phone?

  1. How do I pair my SuperTooth Buddy with a Bluetooth mobile phone?
  2. From OFF, press and hold the On/Off (8) button for 10 seconds until.
  3. the Bluetooth Indicator (4) turns blinking red/blue.
  4. While the handsfree kit is in pairing mode, access the Bluetooth menu.
  5. of your phone.

How do I pair my buddy?

Normal Pairing Procedure:
  1. From OFF, press and hold the On/Off (8) button until the Bluetooth.
  2. While the handsfree kit is in pairing mode, access the Bluetooth menu of.
  3. When the phone displays the list of Bluetooth devices, select ST BUDDY.
  4. If the phone asks for the password/pin code, enter 0000 and press Ok.

How do I turn off SuperTooth Buddy?

From pairing mode or standby mode, press and hold the Volume Up (2). A beep will be heard on kit. Multi-Point Deactivation: From pairing mode or standby mode, press and hold the Volume Down (3).