What size is an m6 wrench?

Size Chart
Bolt size Size Tolerance
3/8″ 9.55
M6 10mm 10.04
M7 11mm 11.04
1/4″UNF 7/16″ 11.15

Also know, what size is m6?

Tap size Basic major dia (mm) Basic major dia (inch)
M4 x 0.7 4mm .1575
M5 x 0.8 5mm .1969
M6 x 1 6mm .2362
M8 x 1.25 8mm .3150

Also, what size Bolt uses a 30 mm wrench? Metric Bolt Head/Wrench Size

Bolt Diameter (mm) Head/Wrench Size (mm)
ANSI/ISO DIN/ISO Heavy Hex
16 24 27
18
20 30 34/32*

Moreover, how do I know what size wrench I need?

Multiply the first number which is the bolt size in inches or millimeters, by 1.5 using a pocket calculator, if necessary. For example, for the numbers in Step 1, 1/2 x 1.5 = . 75 or 3/4, which is the wrench size needed for this standard-sized bolt.

What are the different sizes of wrenches?

Wrenches: Standard Combination Wrenches (1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1) Metric Combination Wrenches (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19) Standard Flare Nut Wrenches (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8) Note: Each wrench may combine two sizes.

M6 5 6.6
M8 6.8 9
M10 8.5 11
M12 10.2 13.5

What size hole is m6?

Tap Size
Tap Size Drill Size
M5 x 0.8 4.2mm
M5 x 0.9 4.2mm
M6 x 1 5mm
M6.3 x 1 5.5mm

What does m6 mean in bolts?

M6 refers to a metric 6mm screw. The outside diameter of the threads is 6mm. The standard metric rack screw is actually an M6 x 0.1mm. The number “0.1mm” refers to 0.1 threads per millimeter. M6 screws are commonly used by HP.

6 millimetres

What size is m12?

Measure them. The M8 will measure about 8 mm in diameter, more likely, just a touch undersize, (. 31496″) The M10, about 10 mm in diameter, (. 3937″) and the M12 about 12 mm in diameter, (.

Is m6 the same as #6?

The standard metric rack screw is called M6 x 1. The ‘M’ means it’s metric. The ‘6‘ is the outside diameter measured in millimeters, and the ‘1’ is the distance between adjacent threads, also in millimeters.

Is 5/16 The same as m8?

8 mm and 5/16” is so close in dimension, would the maker bother to make one a hair larger in size (or one a hair smaller)? The 5/16” will be sloppier. it is equivalent to 8.255 mm. The 5/16” will be sloppier.

How do I measure screw size?

To measure the diameter of screws and bolts, you measure the distance from the outer thread on one side to the outer thread on the other side. This is called the major diameter and will usually be the proper size of the bolt.

What size bolt does a 1/2 inch wrench fit?

Bolt Diameter Head and Wrench Size
Hex Bolt – Lag Bolt – Square Bolt Heavy Hex Bolt
7/16″ 5/8″
1/2″ 3/4″ 7/8″
9/16″ 13/16″

What are the most common wrench sizes?

Most common are the 1/4-inch, 3/8-inch and ½-inch ratchet drivers, but ¾-inch and 1-inch sets are available for heavy-duty work.

What are the standard wrench sizes?

Standard wrench comes in size such as 1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 and 1.

What is the largest wrench size?

Wrench Size Chart for Bolts
Bolt Diameter Wrench Size (Standard) Wrench Size (Metric)
5/16″ 1/2″ 13mm
3/8″ 9/16″ 15mm
7/16″ 5/8″ 16mm
1/2″ 3/4″ 19mm

What size bolt fits a 14mm socket?

Size Chart
Bolt size Size Tolerance
5/16″UNF 1/2″ 13.00
M8 13mm 13.30
1/4″BSW 13.64
14mm 14.35

What is the difference between standard and metric wrenches?

Measurement

Standard wrench sizes are expressed in fractions of inches such as ¼,” ¾,” 1/2”, 9/16” inch and many more. Metric wrenches are measured using units of meters such as millimeters, centimeters and many more, for instance, 20mm, 6 mm, 8cm, etc. It will fit in bolts and nuts that are metric system.

What are the SAE wrench sizes?

Society of Automotive Engineers (SAE) measurement

3/8 in, 7/16 in, 1/2 in, 9/16 in, 5/8 in, 11/16 in, 3/4 in, 13/16 in, 7/8 in, 15/16 in, 1 in, 1-1/16 in, 1-1/8 in, 1-3/16 in, 1-1/4 in.

What size Bolt uses a 10mm socket?

A standard 6mm hex cap screw should have a 10mm head.

What size nut fits a 15mm socket?

The standard wrenches needed are: 11,13,15,17,19,22,24,27,30,32,36mm. I believe that the bold that goes with the 15mm wrench is normally an M8. M8s usually use 12 or 13mm heads.