What type of guard should a jointer be fitted with?


For example, jointers should be fitted with self-adjusting guards.

Click to see full answer

Besides, what are the five general classifications of safeguards?

Safeguards can be grouped under five general classifications: guards, devices, safety controls, gates and location/distance.

Likewise, what is a point of operation guard? Machine guarding. Point of operation is the area on a machine where work is actually performed upon the material being processed. 1910.212(a)(3)(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded.

Beside this, what type of machine guard prevents access to the danger zone altogether?

Guards are barriers which prevent access to danger areas. There are four general types of guards: Fixed: As its name implies, a fixed guard is a permanent part of the machine. It is not dependent upon moving parts to perform its intended function.

What do Guards protect you from?

Machine Guard Basics Machine guards are tangible materials used to keep employees from having direct contact with a machine’s moving parts. Some guards help protect you from kickbacks, flying chips and splashing liquids. Guards can come in the form of sheet, woven or expanded mesh steel.

Do jointers have guards?

There are a few different kinds of machine guards, including fixed, adjustable, and self-adjusting. Each one of these machines has an ideal guard match. For example, jointers should be fitted with self-adjusting guards.

What are the 2 types of primary safeguarding methods?

Primary Safeguarding Methods

Two primary methods are used to safeguard machines: guards and some types of safeguarding devices. Guards provide physical barriers that prevent access to danger areas.

Why it is not safe to use a machine with a guard not in place?

If the guard cannot be physically attached to the machine it must be attached elsewhere; Create no new hazard – A safeguard defeats its own purpose if it creates a hazard of its own such as a shear point, a jagged edge, or an unfinished surface which can cause a laceration.

What are the three main areas of a machine?

All machines consist of three fundamental areas: the point of operation, the power transmission device, and the operating controls.

What tools require a guarding device?

The following are some examples of machines requiring point of operation guarding:
  • Guillotine cutters.
  • Shears.
  • Alligator shears.
  • Power presses.
  • Milling machines.
  • Power saws.
  • Jointers.
  • Portable power tools.

How do you calculate safe distance?

For example the formula for a safety mat is S = (1600 x T) + 1200, so if a machine hazard is being guarded by a safety mat and has a total stopping time of 100 ms the minimum safe distance installation will be 1,360 mm.

What is the rule of thumb in machine safeguarding?

OSHA has stated a useful rule of thumb for this question. “Any machine part, function, or process which may cause injury must be safeguarded.” Whenever operation of a machine or any activity in its vicinity poses the risk of injury to workers, safety mechanisms must be put in place.

What are the different types of guards?

Types of Machine Guards
  • Fixed guards.
  • Interlocking guards.
  • Adjustable guards.
  • Self-adjusting guards.

Why is machine guarding important?

The Importance of Machine Guarding. Machine guarding is basically guarding or protecting machine parts that are the most dangerous. Any machine part, function, or process which may cause injury must be safeguarded. Machine guarding helps to prevent amputations, lacerations, crushing injuries and abrasions.

What is an interlocked guard?

Interlocked. When this type of guard is opened or removed, the tripping mechanism and/or power automatically shuts off or disengages, the moving parts of the machine are stopped, and the machine cannot cycle or be started until the guard is back in place. An interlocked guard may use electrical.

Which type of machine guard physically pulls an operator’s hands out of the danger zone?

Another form of device is the physical restraint variety. It is designed to physically withdraw the operator’s hands from the danger area during operation.

How do interlocking guards function?

Interlocking device (interlock) — a mechanical, electrical, or other type of device, the purpose of which is to prevent the operation of machine elements under specified conditions (usually when the guard is not closed).

What are the 5 primary means to point of operation guarding?

The 5 most common ways of. machine guarding. ✹Barrier Guards. ✹Presence sensing.

How does an interlock control or regulate hazards?

An interlock can be defined as a device that prevents you from making an inappropriate maneuver, or adjusts the system to a safe state if you make an inappropriate maneuver.

What is the area on a machine where work is actually being performed and material is being processed?

Point of Operation – The area on a machine where work is actually being performed upon the material being processed. On some machines, there may be more than one point of operation.

What is an automatic guard?

Automatic guards. 2.4 An automatic guard is designed to automatically prevent an operator or his hands from coming into contact with the dangerous part of a machine when that part is in motion. The movable part of the guard should be positively actuated by the movement of the dangerous part of the machinery.

What are the principles of machine guarding?

  • 1 Point of operation:-
  • 2 Zero Mechanic state (ZMS):- 2.1 Power off:- 2.2 Power-locked off:- 2.3 Guarding:- 2.4 A machine guarding:- 2.5 Enclosures:-
  • 3 Ingoing (in-running) Nips:-
  • 4 Safety by Construction:- 4.1 Elimination of Hazard:- 4.1.1 The basic steps to prevent accidents are:- 4.2 Share with your friends.