Where do you put holdbacks?

414
SHARES
2.3k
VIEWS


Measure the location of the curtain holdback from the bottom of the floor on the side you marked and repeat on its opposite side and make a mark. Most curtain holdbacks are installed between 40 to 48 inches up from the floor, but it is a personal choice where you install them.

Click to see full answer

Subsequently, one may also ask, where should curtain holdbacks be placed?

Generally, curtain tiebacks look best when placed one-third of the way from the top or bottom of the curtain. Tiebacks are both functional and decorative elements of a window treatment. These fabric bands or metal hooks hold the drapes or curtains back from the window.

Beside above, how far up should curtain tiebacks be? Standard lengths for café curtains (commonly used in kitchens) are 24 or 36 inches. Set the height of your tieback. Hang each tieback a third of the way up from the bottom of the curtain. For example, if your curtain is 84 inches long, you would place the tieback about 28 inches from the bottom.

Similarly, you may ask, how do you hang curtain holdbacks?

  1. Measure a spot about 2/3 of the way between the curtain rods and the floor.
  2. Repeat this process on the other side of the window.
  3. Hang the curtains from the curtain rods.
  4. Adjust the holdbacks up or down to get different looks.
  5. Locate the studs on either side of the window.
  6. Attach the drapery holdbacks to the wall.

What is a curtain holder called?

Hardware forms, often called drapery hooks or curtain hooks, are usually U-shaped pieces of metal, sometimes highly decorative, though other materials such as antler might be used.

Can you tie back grommet curtains?

After you have them hung, close the curtains to check the length and width before pulling them back open. In most cases, you‘ll need to use a tie back with grommet curtains. Measure to be sure you install this at the same height on each side of the window frame.

How do you tie back the tassel on curtains?

Gather the curtain loosely and wrap the loop-end of the tieback around it one way and the tassel-end around it the other way. Slip the tieback loop over the tassel, arranging it to rest just at the top of the tassel. Adjust the curtain and the tassel and do the same for the other curtain.

How many inches above window should curtain rod be?

6 inches

How do you attach curtain tie backs to fabric?

To install this type, pull the draperies completely closed. Take one side and gather it together in the middle, then pull it to the side of the window. Loop the tieback around the center section of the drapery at least twice.

How do curtain holdbacks work?

Tiebacks are decorative fabric strips or cords used to secure open curtains into elegant draped lines. Whatever type of tieback you use, the drapery accessories give the room a clean, polished look as long as all the tie backs in the room are at the same level.

How do you hang sheer scarf curtains?

Loop the scarf around the middle of the rod for an extra decorative touch. Thread the fabric underneath and behind the curtain rod in the middle, then back up over the top to create a wavy drape in the middle. Hook the scarf on each end of the curtain rod and let the sides hang down evenly.

How high do you hang 84 inch curtains?

When you buy them in stores or online, there are two standard lengths: 84 inches and 95 or 96 inches. The length of the curtain dictates the height of the rod. If you buy 84inch-long curtains, the rod must be mounted roughly 84 inches from the floor if the curtains hang from the rod without rings.